Devant One & Devant Special    TWO DELUXE ANTENNAS-ONE COMMON GOAL-YOUR COMMUNICATION NEEDS.

       *No Measuring  - Pre- Drilled - Color-Coded
       *Stainless Steel Hardware
       *Two Year Warranty

DEVANT ONE & DEVANT SPECIAL, 5/8 wave vertical ground plane antennas offer dependable base-to-base, and base-to-mobile communications you can count on. Their exclusive design is yet unequaled by any other antennas of their kind. Both of these antennas deliver a consistent 360° omni-directional radiation pattern.

Other features include - grounded element lightning protection that also reduces rain static noise -high strength "cycolac" radial support base section - female coax connector lead-in termination -phenolic radiator support tube whose strength exceeds the tubing itself. All hardware is of stainless steel or other non-corrosive material to meet government specifications.

ONLINE CATALOG CLICK HERE >

Top CB Page

  MINI-SIZE, MINI-COST with MAXI-PERFORMANCE

     MOSLEY MODEL MB-11

       *No Measuring  - Pre- Drilled - Color-Coded
       *Stainless Steel Hardware
       *Two Year Warranty

Before the Mini-beam you had to choose either the economy and convenience of a ground plane, or the superior performance of a beam.  Now you can enjoy the best of both.  The new deluxe Mosley Mini-Beam will do everything a big three-element beam antenna will do EXCEPT waste your money, time, and space.

MB-11's miniature size saves you money and trouble.  It's compact design reduces the area exposed to wind so the antenna can be mounted, without a tower, in a TV antenna mount, and turned with an inexpensive TV rotor.  MB-11 is lightweight, less than one-half the weight of an ordinary three-element beam.  You can assemble and install it quickly and easily: solid-state gamma match, preassembled parts and color-coding combine with lightweight and compact size for ease in handling.

ONLINE CATALOG CLICK HERE >

Top CB Page

  *No Measuring  - Pre- Drilled - Color Coded
   *Heavy Duty Construction
    *Stainless Steel Hardware
     *Two Year Warranty

Superlative performance and construction characterizes each beam to insure satisfaction under the most adverse conditions.

Antennas are 100% rust proof.  Stainless steel hardware, high-impact polystyrene insulators with drawn, seamless, aluminum elements & boom will provide many additional years of trouble-free operation.  Low SWR over entire bandwidth.   Maximum gain on all bands with an operating capacity well over 1 KW.  All "Power-Master" antennas are fed with 52 ohm coax using the famous "Mosley-Match".

ONLINE CATALOG CLICK HERE >

Top CB Page

WHAT IS A SASER BEAM?

An exclusive antenna from Mosley! The SASER Beam cuts through the CB interference like a LASER cuts through steel.

The basic design includes one 3-element beam MOUNTED VERTICALLY.  Ideally suited for base to mobile communication.  And one 3- element beam MOUNTED HORIZONTALLY on the same boom for base-station to base- station operation.

Each beam has an individual transmission line wired to the vertical-horizontal switch control unit.  Selection of polarization is thus made simply by turning a dial on the control unit located near the transmitter.

Since a fundamental principle of radio wave propogation is that an antenna radiates a wave-front in the same polar plane as the antenna,  an antenna-mounted vertically (Fig. 1) will radiate in a vertical plane of polarization, and an antenna mounted horizontally will radiate in a horizontal plane of polarization(Fig. 2).

Because an antenna works exactly the same for receiving, it is necessary that the receiving antenna be in the same plane of polarization as the transmitting antenna.   If they are not in the same polar plane, the signal reduction is about 30 db., which is equivalent to dividing the transmitter power by 1000, resulting in virtual elimination of the signal.

If two stations in communication can simultaneously shift polarization opposite to interfering stations, they can eliminate disturbance from stations using the same channel.

This is the principle advantage of the SASER Beam.  As shown in Fig. 3, polarization may be changed at will.

CONSIDER THIS: You're receiving a good signal,  but interference is cluttering the channel.  You switch your SASER beams to horizontal and interference is wiped out.  In comes your signal on a clean, clear channel.

CONSIDER THIS: You're trying to copy on vertical,  but someone else is hogging the channel.  You switch to horizontal and he's gone! The channel is clear for you to talk.

WHAT DO YOU WANT IN A BASE STATION ANTENNA?

TOP GAIN so you can get the most from your power output.  The Mosley SASER Beams offer maximum gain in either plane of polarization.

HIGH-DIRECTIVITY to eliminate unwanted side and back signals.  Check the performance data of the SASER Beam for the outstanding front-to-back ratio that permits you to copy with minimum interference.

MAXIMUM DISTANCE so you can contact your most remote station.  Mosley SASER Beam low angle of radiation keeps your signal close to the ground for maximum range.

QUALITY COMPONENTS AND CONSTRUCTION that will withstand difficult weather conditions and save you repairs.  The Mosley SASER Beam is assembled with stainless steel hardware and drawn, seamless, aluminum tubing.   The Mosley double "T" matching system is a perfected electro-mechanical arrangement which provides for a balanced feed both horizontally and vertically.  The SASER Beam comes complete with time-proven mast clamping, all necessary color-coded hardware, and easy-to-follow assembly instructions.

ONLINE CATALOG CLICK HERE >

Top CB Page

SCOTCH MASTER BEAMS

  *No Measuring - Pre-Drilled - Color Coded
   *Stainless Steel Hardware
    *Two Year Warranty

Hand-crafted under rigid engineering standards are designed for the economy minded CB'er without sacrificing quality for price.  Scotch- Master beams are constructed of highly durable seamless, drawn, aluminum tubing to withstand wind loads of (EIA Standard) 80 miles per hour.  All stainless steel and non-corrosive hardware insuring longer antenna life.

Electrically, Mosley Scotch-Master beams are second to none in their lightweight class of three- element, four-element and five-element powered beams.  Scotch-Master beams may be mounted vertically or horizontally, and rotated easily with a standard, inexpensive TV antenna rotor.  Complete with color-coded, pre-drilled parts and illustrated instructions for fast, easy assembly. 

STACKING...

By stacking two Mosley beams, you can double the effective power transmitter, and double the efficiency of your receiver.  Beam stacking is an art which has long been known, but can be a bit difficult unless an effective kit is used.  The Mosley Stacking Kit is available for stacking the Scoth-Master series beams.  The kit consists of stacking boom, hardware, coax, and all the necessary parts for phasing and matching assembly.  Illustrated assembly instructions are included.

ONLINE CATALOG CLICK HERE >

Top CB Page

SHORT WAVE ANTENNAS

SELECT QUALITY SHORT WAVE LISTENING ANTENNAS

MOSLEY MODEL SWV-7

  *No Measuring - Pre-Drilled - Color Coded
  *Stainless Steel Hardware
  *Two Year Warranty

CRAMPED FOR SPACE?  The Mosley vertical SWV antenna was designed for you. A rugged and sleek looking beauty standing just under 14 feet high.  Ground level installation requires less than 1 square foot of space.

Six unique trap assemblies tune(resonantes automatically) to center of 11, 13, 16, 19, 25, 31 and 49 meter bands to deliver unprecedented DX reports in short-wave listening. 

The SWV-7 is constructed of only the finest alloy aluminum tubing, not only telescoped, but swaged to reduce wind vibrations.

ONLINE CATALOG CLICK HERE >

Top CB Page